IO

HITIPanel requires some I/O configuration to be set via our library so that it can retrieve the configuration. This is the case of the Output Type.

Output Type

  • HC_outputType(pin, type)

A Digital Output can be either DIGITAL or PWM. By default, it is DIGITAL. The following function is required to explicitly set the type of a Digital Output for a specified pin:

Parameters

  • pin (byte): pin number
  • type (bool): type =>  DIGITAL (LOW) or PWM (HIGH).

Example

Refer to this example : Analog output (PWM).

 

Was this article helpful?
0 out of 0 found this helpful